What happens if you use the wrong furnace filter?

However, an incorrect air filter can reduce the efficiency of heating and air conditioning systems and increase heating and cooling costs. If the filter is too dense, the heater or air conditioner may need to run longer to counteract the increase in air resistance.

What happens if you use the wrong furnace filter?

However, an incorrect air filter can reduce the efficiency of heating and air conditioning systems and increase heating and cooling costs. If the filter is too dense, the heater or air conditioner may need to run longer to counteract the increase in air resistance. Using an incorrectly sized air filter won't necessarily damage your air conditioning system, at least not immediately. However, it does have an impact.

Using the wrong size reduces the efficiency of your heating and cooling system. This can quickly add up to a more obvious problem that you'll probably notice on your next utility bill. An oven filter installed backwards can cause what are known as short cycles. This is when the HVAC turns on and off faster than it should.

When you fold the filter, you get an imperfect seal. Air will filter through and around the curve, bypassing the filter completely. This causes dirt and debris to build up on the fan, slows airflow, degrades performance, reduces air quality, and generally creates a big mess that you'll have to pay to repair or clean it later. If you moved to a new house or someone was asked to change your air conditioning filters, you might notice that the person who did the work put the wrong size filter in.

The return side is when air returns to the furnace after circulating throughout the interior of the house. You'll end up with a dirty boiler that won't be able to work properly, and all that dirt could end up damaging the internal components of the system. Using an incorrect air filter can cause numerous problems with the air conditioning system, including a decrease in indoor air quality. It may surprise you to find extremely dirty filters, missing filters, incorrectly sized filters, and finally, properly installed filters incorrect.

The evaporator coil is basically a snake-shaped system of refrigerant tubes in your air conditioning system and is usually located on top of the oven. So what do you do when you have the wrong size air filter? The only solution is to find the right size. An air conditioning filter installed upside down will slow airflow considerably, making it harder for your oven to operate. If you reverse the direction and install a furnace filter upside down, you risk suffering from some things such as.

If you're wondering what happens when you use an incorrectly sized air filter, air quality isn't the only thing you need to worry about. When you install the oven filter upside down, there is no uniform distribution of dust throughout the 1-inch filter material. However, you may never reach it because the overheat sensor turns off the oven before reaching the desired temperature. With the short and repeated cycles of your boiler or air conditioning system, you are putting much more pressure on the system than with normal use.

The biggest concern when using an incorrectly sized air filter is that it doesn't effectively prevent dust accumulation on the motors and blowers of the HVAC system. This makes sense because you want to filter the air before it reaches the actual furnace equipment and cover it with dust.